When CNC dividing disk chuck lathe when applied correctly, can provide the parts of zero delay function card needed. This is because when the two spindles in the cutting state, the other two spindle device that needs processing parts.
Let us imagine with tray exchange function of HMC (horizontal machining center) processing condition of the machine. When the machine in a tray on the workpiece, another tray outside the HMC is in a workpiece preparation work. Therefore, as long as two pallets in exchange their position, just may attack delay phenomenon.Now, let's imagine a 4 shaft lathe in four angular indexing bracket drum processing. This kind of bracket drum function is roughly and pallet exchange HMC machine tools installation function the same. It can make two of the four main shaft in a manufacturing environment in a closed, and at the same time turning two workpieces. At this time, in two spindle machining area outside of the workpiece to the manual, mechanical hand or Longmen type feeding device needs processing. When the workpiece at one of the spindle complete turning, bracket drum start indexing operation, the other two new workpiece spindle is sent to the processing region. Cycle only turning machining operation beyond the new device of workpiece, so as long as the spindle carrier drum points crossing process will attack a few seconds delay phenomenon.
Three major advantages of the turning platform: first, this kind of machine can save a lot of part clamping time; second, when the processing cycle of a workpiece A face and B face in an unbalanced state, using this type of machine is very effective; third, whether the workpiece is used in manual device, or after the automatic clamping, cycle only turning device of workpiece beyond time, then the machine tool consumption efficiency is complete.
